Influence of Manufacturing Parameters on The Mechanical Properties of PLA Components

Abstract

Now a days most of industries are using AM technologies, in this one of the technologies of Fused Deposition Modeling (FDM) is a popular one, by using this technology so many are printing both basic and complex model By using printing parameters parts are printing, in this paper particularly concentrated on Infill, Layer Height and shell thickness are used to print. To get good-quality printed part with less material simultaneously with good strength is important. So, here investigation done on parts printed using selected parameters opted. Finally, after testing the printed parts with higher infill percentage, lower layer thickness and moderate shell thickness is suitable parameters to print the components with good tensile and impact strength compare to all other parameters and also inspection done.