Chitosan and Carbon NanoDot (CNDs) as Filter For Contact Oil as Additives in Oil for Enhancing the Wear Resistance

Abstract

The purpose of this work was to investigate a wear resintance, the friction and wear characteristic of Chitosan and NanoDot (CNDs) as filter for contact oil as additives for enchanging the wear resistance were been evaluated test conditions to simulated before and after_. The stability of oil (ferrolubricant) with the addition of Chitosan and Carbon NanoDot 2.5 ml and 7.5 ml is homogenous, and at 100 °C viscosities, the lubricant and Ferro lubricant (Oil) are 8.65 mm²/s and 8.96 mm²/s, respectively. The elements absorbed in lubricant and Ferro lubricant (Oil) are Cr and Mg elements at 115 and 125, respectively, with a total base number of 0.55. It is seen from the oxidation, soot, and nitration attributes that Mg is high in sulfate. In conclusion, particle quantification is high and Fe is Low, with the majority of the wear larger than 10 µm. Chitosan and Carbon NanoDots has the ability to produce good ferro-lubricant (oil).