Thermal Comfort-Based Fan Speed Estimation: A Sensor-Based Approach for Adaptive Indoor Airflow

Main Article Content

R. V. Shanmathi, I. Irfana, A. Angelin Stefi

Abstract

This paper presents a sensor-based framework for thermal-comfort assessment and automatic fan-speed estimation using environmental and occupant-related measurements. A DHT22 sensor acquires room temperature and relative humidity, an LM35 provides body-temperature information, and a pulse sensor provides heart-rate data. A NodeMCU is used for ambient-temperature acquisition and communication, while an Arduino UNO performs data acquisition and processing. Required air movement is estimated from the measured thermal condition, and fan speed is related to the airflow requirement using a fan-performance relationship. PMV and PPD are calculated to quantify thermal sensation and dissatisfaction. For the reported test condition of 33 °C ambient temperature and 40.70% relative humidity, the calculated air velocity was 1.21 m/s, the estimated fan speed was 157 rpm, and the reported PMV was 2.8. These results demonstrate the intended sensing-to-comfort computation chain; however, multi-condition testing, sensor calibration, airflow/speed measurement, repeatability, uncertainty analysis, and energy-consumption measurements are required to substantiate closed-loop fan-speed control.

Article Details

Section
Articles